Rasterelektronenmikroskop für Bildgebung und quantitative Analyse geologischer Proben

Der Auftraggeber hat die Eingabefrist um zwei Wochen verlängert: neuer Termin ist der 11. November 2026, 12:00 Uhr MEZ (UTC+01:00), elektronische Einreichung über SIMAP.

Eingabefrist
11:00 · UTC
Auftragswert
In der Bekanntmachung nicht angegeben
Klassifizierung
Arzneimittel und Laborbedarf
Veröffentlicht
29. September 2026

SIMAP (Swiss public procurement platform)

Überblick

Das Institut für Geochemie und Petrologie der ETH Zürich schreibt ein neues Rasterelektronenmikroskop (REM) aus, das das bestehende Analysegerät ersetzen soll. Die Spezifikation verlangt eine Feldemissionsquelle, Detektoren für Sekundär- und leistungsstarke Rückstreuelektronen sowie ein energiedispersives Röntgenspektrometer mit grosser Detektorfläche von mindestens 100 mm². Varianten sind zulässig, sofern das Grundangebot ebenfalls angeboten wird; Optionen richten sich nach den Ausschreibungsunterlagen. Das Verfahren ist offen. Angebote können in einer der drei Amtssprachen der Schweiz eingereicht werden, Englisch wird bevorzugt, und sind als ZIP-Datei maschinenlesbarer PDF-Dateien auf SIMAP hochzuladen. Die Eingabefrist wurde um zwei Wochen auf 11. November 2026, 12:00 Uhr MEZ (UTC+01:00), verlängert und ist abgelaufen. Der Kauf steht unter dem Vorbehalt der Beschaffungsreife des Projekts und der Verfügbarkeit der Kredite.

Informationen aus der öffentlichen Bekanntmachung

Was der Auftraggeber benötigt

Beschaffung eines Rasterelektronenmikroskops mit Feldemissionsquelle, SE- und BSE-Detektoren sowie einem EDS mit grosser Fläche (mindestens 100 mm²) für das Institut für Geochemie und Petrologie der ETH Zürich. Varianten und Optionen sind gemäss Ausschreibungsunterlagen zulässig.

  • Elektronische Einreichung auf SIMAP als ZIP-Datei maschinenlesbarer PDF-Dateien, hochgeladen und vor Ablauf der Frist eingereicht.
  • Varianten nur, wenn das Grundangebot ebenfalls eingereicht wird.
  • Bankgarantie für Anzahlungen über CHF 50'000.-.

Details

Auftraggeber
ETH Zürich - Abt. Procurement & Export Services
Land
Schweiz
Verfahren
open
Klassifizierung
Arzneimittel und Laborbedarf · CPV 38511000
Bekanntmachungsreferenz
44440 · 44440-02
Eingabefrist
11. November 2026, 12:00 Uhr MEZ (UTC+01:00), nach zweiwöchiger Verlängerung
Öffnung der Angebote
11. November 2026, 13:30 Uhr MEZ (UTC+01:00)
Zahlungsbedingungen
30 Tage netto nach Lieferdatum oder Rechnungsdatum, gemäss AGB ETH-Bereich
Fragefrist
12. Oktober 2026

Was in den Vergabeunterlagen zu prüfen ist

  • Die Bekanntmachung nennt keinen geschätzten Auftragswert.
  • Die Bekanntmachung nennt keine Vertragsdauer und kein Liefermdatum; diese stehen in den Ausschreibungsunterlagen.
  • Die Zuschlagskriterien stehen in den Ausschreibungsunterlagen, nicht in der Bekanntmachung.
Mit Ziva loslegen

Originalbekanntmachung

Originalbeschreibung lesen

Scanning electron microscope for imaging and quantitative analysis in geological samples

Scanning electron microscope for imaging and quantitative analysis in geological samples SIMAP public tender notice Procedure: open Publication number: 44440-02 Publication date: 2026-09-30 Tender deadline: 2026-11-11T12:00:00+01:00 Offer opening: 2026-11-11T13:30:00+01:00 CPV code: 38511000 Electron microscopes Additional CPV code: 38000000 Laboratory, optical and precision equipments (excl. glasses) Description: The Institute of Geochemistry and Petrology at ETH Zürich is seeking to upgrade its existing analytical scanning electron microscope (SEM) for a new SEM equipped with a field emission gun, secondary electrons detector (SE) and high-performance backscattered electron detectors (BSE), and a state-of-the-art large area (≥ 100 mm2) energy dispersive spectrometer (EDS). Among several options, we welcome offers for panchromatic and/or entry-level monochromatic cathodoluminescence detector. The main goal of this instrument will be to provide precise and accurate quantitative analyses by EDS using a rigorous quantification protocol that includes the use of reference materials and a full matrix correction (ZAF, phi-rho-z, or equivalent). The instrument should have a large chamber to allow a minimum of 3 petrographic thin sections and 6 one-inch epoxy round mounts. It should be programmable so that we run series of >24 hours of automated quantitative EDS analyses. For further details, please refer to the specifications. Variants: Variants are permitted as long as the basic offer is also provided. Options: according to tender documents Other requirements: The project's readiness for procurement and the availability of credits remain reserved. Offer submission: Electronic submission directly to the platform www.simap.ch. Please upload the documents as machine-readable PDF files in a single ZIP file. Please ensure that the bid has been submitted/transmitted before the submission deadline. Please do not use file names that are too long, as this can cause problems when downloading the files. Please note that you must not only “upload” your documents, but also “submit” them. You will see immediately on the platform whether it has worked. ETH Zurich will not send any confirmation of receipt. Questions deadline: 2026-10-12. Written questions will be accepted in the forum of www.simap.ch until the mentioned date. After this date, they will be anonymized and made available again on www.simap.ch together with the corresponding answers. Legal remedies: In accordance with Article 56 paragraph 1 of the Public Procurement Act (PPA), a written appeal against this decision can be lodged with the Federal Administrative Court, P.O. Box, 9023 St. Gallen, Switzerland, within 20 days of notification. Any appeal is to be submitted in duplicate and must include what is being sought, the grounds for appeal, evidence and the signature of the person lodging the appeal or his or her representative. A copy of this decision and available evidence must be included. The provisions of the Administrative Procedure Act (APA) on legal holidays do not apply in accordance with Article 56 paragraph 2 of the PPA. Correction remarks: The deadline for submitting tenders has been extended by two (2) weeks. New deadline: Wednesday, 11 November 2026 at 12 noon via Simap (electronic submission).

Offizielle Quelle: SIMAP (Swiss public procurement platform) ↗

Aktualisierungen

11. November 2026 · Fassung 2

Auftraggeber aktualisiert · Klassifizierung aktualisiert · Fristangaben aktualisiert · Zusammenfassung und Analyse aktualisiert · Ausschreibungsangaben aktualisiert · Originalbekanntmachung aktualisiert · Frist aktualisiert · Ort aktualisiert · Quelle aktualisiert · Angaben der Quelle aktualisiert · Quellenverweise aktualisiert · Status geändert · Aktualisierung hinzugefügt

Scanning electron microscope for imaging and quantitative analysis in geological samples

Scanning electron microscope for imaging and quantitative analysis in geological samples SIMAP public tender notice Procedure: open Publication number: 44440-02 Publication date: 2026-09-30 Tender deadline: 2026-11-11T12:00:00+01:00 Offer opening: 2026-11-11T13:30:00+01:00 CPV code: 38511000 Electron microscopes Additional CPV code: 38000000 Laboratory, optical and precision equipments (excl. glasses) Description: The Institute of Geochemistry and Petrology at ETH Zürich is seeking to upgrade its existing analytical scanning electron microscope (SEM) for a new SEM equipped with a field emission gun, secondary electrons detector (SE) and high-performance backscattered electron detectors (BSE), and a state-of-the-art large area (≥ 100 mm2) energy dispersive spectrometer (EDS). Among several options, we welcome offers for panchromatic and/or entry-level monochromatic cathodoluminescence detector. The main goal of this instrument will be to provide precise and accurate quantitative analyses by EDS using a rigorous quantification protocol that includes the use of reference materials and a full matrix correction (ZAF, phi-rho-z, or equivalent). The instrument should have a large chamber to allow a minimum of 3 petrographic thin sections and 6 one-inch epoxy round mounts. It should be programmable so that we run series of >24 hours of automated quantitative EDS analyses. For further details, please refer to the specifications. Variants: Variants are permitted as long as the basic offer is also provided. Options: according to tender documents Other requirements: The project's readiness for procurement and the availability of credits remain reserved. Offer submission: Electronic submission directly to the platform www.simap.ch. Please upload the documents as machine-readable PDF files in a single ZIP file. Please ensure that the bid has been submitted/transmitted before the submission deadline. Please do not use file names that are too long, as this can cause problems when downloading the files. Please note that you must not only “upload” your documents, but also “submit” them. You will see immediately on the platform whether it has worked. ETH Zurich will not send any confirmation of receipt. Questions deadline: 2026-10-12. Written questions will be accepted in the forum of www.simap.ch until the mentioned date. After this date, they will be anonymized and made available again on www.simap.ch together with the corresponding answers. Legal remedies: In accordance with Article 56 paragraph 1 of the Public Procurement Act (PPA), a written appeal against this decision can be lodged with the Federal Administrative Court, P.O. Box, 9023 St. Gallen, Switzerland, within 20 days of notification. Any appeal is to be submitted in duplicate and must include what is being sought, the grounds for appeal, evidence and the signature of the person lodging the appeal or his or her representative. A copy of this decision and available evidence must be included. The provisions of the Administrative Procedure Act (APA) on legal holidays do not apply in accordance with Article 56 paragraph 2 of the PPA. Correction remarks: The deadline for submitting tenders has been extended by two (2) weeks. New deadline: Wednesday, 11 November 2026 at 12 noon via Simap (electronic submission).

11. Oktober 2026 · Fassung 1

Veröffentlicht

Scanning electron microscope for imaging and quantitative analysis in geological samples

The Institute of Geochemistry and Petrology at ETH Zürich is seeking to upgrade its existing analytical scanning electron microscope (SEM) for a new SEM equipped with a field emission gun, secondary electrons detector (SE) and high-performance backscattered electron detectors (BSE), and a state-of-the-art large area (≥ 100 mm2) energy dispersive spectrometer (EDS). Among several options, we welcome offers for panchromatic and/or entry-level monochromatic cathodoluminescence detector. The main goal of this instrument will be to provide precise and accurate quantitative analyses by EDS using a rigorous quantification protocol that includes the use of reference materials and a full matrix correction (ZAF, phi-rho-z, or equivalent). The instrument should have a large chamber to allow a minimum of 3 petrographic thin sections and 6 one-inch epoxy round mounts. It should be programmable so that we run series of >24 hours of automated quantitative EDS analyses. For further details, please refer to the specifications.